02 / PLAN
Calculating…Your wall, to scale
Rails & stilesPanel moldingOpening / clearanceClick a panel or stile to inspect it
MARK YOUR WALL
All marks from the left edgeStile positions
03 / CUT
Every piece, accounted for
Cut lengths round up to 1/32 in for fitting. Panel molding is measured long point to long point. Square pieces reserve one kerf; mitered pieces reserve two cuts, adjusted for the angle. Each board also reserves two end trims.
FROM STOCK TO WALL
Board-by-board cutting map
Use these nests as a starting point. Measure each piece on site before cutting. Stock selection uses an efficient heuristic and may not be the absolute minimum.
04 / BUY
Your Home Depot list
Quantities come from the stock maps and include your selected extra boards. Links search for matching products; confirm actual dimensions, package size, and local availability.